Gutters & Downspouts
Gutters & Downspouts in Fort Worth
Seamless gutter installation, guards and drainage correction for homes across Fort Worth and the surrounding Tarrant County cities.
Insured crews · Sizing calculated, not assumed · Discharge routed clear of the foundation
Gutters That Move the Water Somewhere Useful
Gutters and downspouts in Fort Worth do more work than most homeowners realize, because this county rain arrives in short, heavy bursts rather than steady drizzle. An undersized run overflows at the first serious cell of the season, and the water that should have gone to the street ends up against the slab instead, which in North Texas clay is how foundation problems start.
Roofing Fort Worth Pros sizes gutters to the roof area actually shedding into them rather than fitting the same five-inch profile to every house out of habit.
We come out of a roofing background, which changes how we approach this: the gutter is the end of a drainage system that starts at the ridge, and if the drip edge, the fascia line or the roof pitch above it are wrong, a new gutter will not fix the symptom. We check all of it before quoting.
What Gutter Work Covers
Every elevation is measured and priced on its own, so you can replace one run rather than the whole house if that is all it needs.
- Seamless gutter formed on siteRuns rolled to length at your house so there are no joints along the run to open up and drip, with seams only at the corners and outlets where they are unavoidable.
- Profile and size selected by roof areaFive-inch versus six-inch, and K-style versus half-round, chosen against the square footage and pitch feeding each run rather than applied uniformly.
- Downspout sizing and placementOutlet count and downspout capacity matched to the volume each run carries, positioned where they discharge sensibly rather than wherever the shortest drop happens to be.
- Discharge routed away from the foundationExtensions, splash blocks or underground runs so water is delivered clear of the slab, which in Tarrant County clay is the entire point of the exercise.
- Gutter guards where tree cover justifies themScreen and micro-mesh options on the elevations that actually need them, with a straight explanation of what guards do and do not eliminate in terms of maintenance.
- Fascia and rafter tail assessmentRotted fascia will not hold a hanger and needs addressing before new gutter goes up. We check it during the measure and price any repair as its own line.
- Drip edge correction at the eaveWhere the roof edge is letting runoff track behind the gutter instead of into it, the drip edge is installed or reset so the system actually catches the water.
- Hanger spacing for heavy rain loadsHidden hangers set at spacing that holds a full gutter during a genuine downpour, rather than the widest spacing that passes on a dry day.
- Colour matched to trimCoil colour selected against the existing fascia and trim so the run reads as part of the house.
- Removal and disposal of the old systemExisting gutter taken down and hauled off, with the fascia line cleaned up and any old fastener holes addressed before the new run goes on.
How a Gutter Job Runs
- 01
The measure
We measure every run, calculate the roof area feeding each one, and check the fascia, the rafter tails and the drip edge at the eave. Where a run has been overflowing we work out whether the cause is size, slope, blockage or the roof edge above it. This is a short visit, usually under half an hour, and it is free.
- 02
The quote
You get the recommended profile and size for each elevation, the downspout count and placement, the discharge plan, any guard recommendation and any fascia repair, each priced on its own line. If part of the existing system is fine and only one elevation needs replacing, that is what the quote says.
- 03
Installation
Runs are formed on site to length, hung to spacing, outlets cut and downspouts set and secured. Most single-family jobs are completed in a day. We water-test the runs before leaving so you can see them carrying properly, clear the site and haul off the old material.
Why Have a Roofer Do Your Gutters
We look above the gutter as well as at it
Overflow is frequently a drip edge or roof-edge problem rather than a gutter problem. A gutter company will sell you a bigger gutter. We will tell you the water is going behind it and fix the actual cause.
Sized for burst rainfall, not average rainfall
North Texas rain shows up all at once. Sizing to the roof area feeding each run, and setting outlet count accordingly, is what keeps a gutter working through a real cell rather than only through a light shower.
Discharge treated as part of the job
A gutter that dumps at the base of the wall has moved the problem three feet, not solved it. Where the water goes after the downspout is on our scope, because in this soil it is the part that matters most.
- Insured crews
- Free measure and assessment
- Seamless runs formed on site
- Sizing matched to roof area
- Line-item written estimate
- Water-tested before the crew leaves
Fix the Overflow Before It Reaches the Slab
If a run has been spilling over the front edge during heavy rain, the water is landing where you least want it. Have the runs measured, the roof edge checked and the discharge planned properly, and get each piece priced on its own line.
Book a gutter measure — (817) 369-3918